Files must be in vector format with all fonts converted to outlines, curves or paths. Bitmap files must be reviewed and approved by Art Department and may require an art charge. We accept the following formats: Adobe Illustrator CC, CorelDraw 13, and Photoshop CC (four color process only). Photocopies, faxed art, sketches, stationary, business cards, and other imprinted products are not considered sufficient print ready art, and may be subject to an art charge for recreation when possible. ETS reserves the right to reject any art that is not considered print ready. Art adjustments and recreations are charged at an hourly rate of $75.00(g), which are quoted before production begins. Art submission emails must specify distributor name and purchase order number. IF NOT SPECIFIED ON THE PURCHASE ORDER, ART SIZE AND PLACEMENT WILL BE AT THE DISCRETION OF THE ETS ART DEPARTMENT.
Typesetting is charged at a rate of $20.00(g) per three lines of straight-line copy. Unless otherwise specified, typestyle is at the discretion of the art department.
Files must be vector format with all fonts converted to outlines, curves or paths. Pixel based or bitmap artwork will require an art charge and may require a pre-production sample (prior review required). Emails must specify distributor name and purchase order number.
We accept the following formats:
Halftones are printed at 60 DPI and must be reviewed and approved by the Art Department prior to printing. A Pre-Production Proof (PPP) may be required.
ETS Express, LLC offers a variety of inks. PMS colors are designed to be printed on white paper and are used for reference only. Due to the nature of ceramics, glass, and the firing process, exact matches cannot be guaranteed. ETS spot printing utilizes the following Pantone varieties: Pantone® Solid Coated, Pantone Metallic Coated, & Pantone Solid Uncoated(requires a Pre-Production Proof for use). A Pre-Production Proof (PPP) is strongly recommended when imprint colors are critical.
Orders must clearly specify if artwork is one-sided, two-sided, opposite the handle, or wrap-around. Orders must also clearly state if artwork is to exact size, or should be enlarged or reduced. In the absence of clear instructions, sizing and placement is at our own discretion. If specific instructions for art size and location are not clearly stated on the purchase order, then no claims will be processed. Imprint locations are defined as follows:
For all standard serif and sans serif fonts, the minimum font size to print clearly is 7 pt. The minimum font size for embellished fonts varies. Curved lines must be a minimum of 0.5 pt thickness to print; straight lines must be a minimum of 1.2 pt thickness to print cleanly. There must be a minimum of 0.75 pt thickness clear space between objects in order for them to print without filling in.
ETS Express, LLC reserves the right to commence production upon receipt of the order. Customer will be required to pay for all work completed at the time of cancellation. Any changes requested after artwork has been prepared for production may incur additional film and screen charges. All cancellations and changes to any pending order must be submitted in writing.
$20.00(g) per color. Must be in full case quantities.
All claims for damage or shortages in shipments must be made within 10 days of receipt of the shipment. Otherwise, shipment is assumed to be received without damage and complete. Neither ETS nor Distributor assumes any liability for damage or shortages after this point. No returns are accepted without prior written consent of ETS. No product is accepted for return after being altered or otherwise used. ETS disclaims any responsibility for products after 30 days in buyer´s possession.
ETS Express, LLC will not be responsible for any duplicate shipments that occur if “confirming” does not appear on any follow-up or faxed orders.
ETS Express, LLC is now the exclusive provider of Contigo® & Bubba® brand products for the promotional products industry. Because of the special arrangement between Ignite and ETS, there are special arrangements that may differ from regular ETS Product offerings.
Upon request, overruns will be sent at cost of item plus freight.
Hand washing is recommended for all of our products to promote the durability of the imprints. Dishwashing using commercial equipment (in restaurants, schools, etc.) is discouraged; the harsh detergents and extremely hot water will damage the decorations. Do not microwave any products containing metal, rubber or plastic; ceramics and glass items are generally safe for microwave unless they have a cork base or are otherwise noted on the product or related care information.
ETS Express is able to provide bulk drop shipments up to 5 locations. Drop or split shipments are billed at $8.00(g) per drop ship location after the first shipment and must be in full case quantities. Broken cases are billed at $16.00(g) per drop ship location. Drop ship addresses must be received a minimum of 3 working days prior to the scheduled ship date. Any delays in receiving the addresses will result in changes to the scheduled ship date.
In order to focus all available resources to producing orders, we are currently unable to offer individual drop ship services or large quantity locations.
Initial e-proof is sent at no charge. One complimentary change to the art is also honored at no charge. Subsequent changes will incur an additional charge of $20.00(g) per proof.
Click here for no proof e-rush services.
Single color foil imprints are available on select items as either a 1 side or 2 sided imprint (wrap options are not available). Foil colors include gold, copper, or platinum. Powder coated items are available for an added cost. Foil imprint may have small imperfections and vary slightly from other bottles in production run. Rush services are not available.
Gift and mailer boxes are available for most items. Allow additional production time of 1-3 days. Specify gift or mailer (3g). Note: pricing below refers to standard gift and mailer boxes only.
|12 -16 oz||3.50||4.25||5.00|
|17 - 20 oz||3.50||4.25||5.00|
|24 oz & larger||3.50||n/a||n/a|
When orders are manufactured to customer´s specifications, the customer shall hold ETS harmless from any liability for trademark, patent or copyright infringements, proprietary rights violations, invasion of privacy or other personal or intellectual property rights infringements or violations. All materials submitted by the customer for use by ETS to produce items ordered are considered by ETS to be in full compliance with all applicable laws in regards to trademark, service mark, copyright, patent, or similar protection, and the customer has all of the legal rights and authorizations to grant ETS a limited license for the express purpose of reproducing such materials on the products. It is the customer´s responsibility to provide appropriate legal lines to ETS for inclusion in the art.
LTM orders must be at least half of the first column quantity of the pricing listed on www.etsexpress.com. Refer to the first quantity column for the item unit cost. A $60.00(g) LTM charge will be incurred in addition to normal screen charges.
Additional packaging is required for any ceramic or glass orders shipping via parcel service carriers (UPS, FedEx, DHL). See the product detail page for additional charges.
Due to the inherent nature of ceramics and the properties of glassware produced by foreign and domestic manufacturers, there may be slight imperfections and irregularities which should not be perceived as defective. Variations in materials, firing temperatures and color pigments may result in variations in glaze and imprint colors. Ounces, sizes, and measurements are approximate and may vary from batch to batch, and within each batch. These variations are within industry standard and therefore must be considered acceptable.
Catalog end quantity price (c) less $0.40 (c). Must be in case quantities. (Contigo®, Bubba®, & glass products are excluded.)
To ensure that your order will be processed as quickly as possible and to ensure that all ship dates will be met, please be specific on your purchase orders. Please type or print legibly our item number, quantity, imprint color(s) and location, complete shipping information, and any other information relative to your order. ETS Express, LLC will not be responsible for any misinterpretation of copy layout on handwritten orders or layouts. Unless otherwise specified, ETS Express, LLC reserves the right to select fonts and rearrange copy for best appearance or to meet product limitations. It is important that a ship date be included to expedite your order. ETS Express, LLC will only be responsible for meeting ship dates and cannot guarantee in-hands or special event dates due to carrier delays. Please carefully proofread all artwork for accuracy as ETS Express, LLC will not be liable for errors in submitted artwork. On re-orders please include the previous invoice number as well as the month and year of the previous order. A brief description of the imprint is also helpful. Also specify if there will be color or copy changes. We cannot guarantee exact color matches on repeat orders due to reasons described in “Nature of Ceramics”.
To maintain quality control, we reserve the right to ship up to 5% over or under the quantity ordered and bill accordingly. This is the industry standard and must be considered fulfillment of the order. Orders requiring "no overruns" are subject to 5% underrun, and orders requiring "no underruns" are subject to an overrun of up to 5%. "Exact quantity" orders are available at an additional charge of $25.00(g).
Many items shown in the catalog are the exclusive property of ETS Express, LLC or its affiliated companies and are protected under one or more U.S. federal laws against trademark, patent or copyright infringement. All other trademarks and copyrights are the property of their respective owners.
Personalization is not available.
Click here for current production times.
Tolerance on multi-color tight registration artwork is 1/16”. This tolerance is industry standard and must be considered acceptable.
Click here for current rush information.
This imprint simulates an “etched” look and is considered a standard imprint color.
spot color: $65.00(g) per color on initial order. Exact reorders of previous order will not incur new screen charges.
full color printing (H4 & D4): $100.00(g) click here for more info.
foil: $100.00(g) click here for more info.
laserX: $85.00(g) click here for more info.
All shipments will be sent prepaid unless otherwise specified. Freight estimates given by ETS Express are not guaranteed and are subject to change without notice as rates can fluctuate. Master cartons to protect against breakage are used and billed at $7.00(g) per carton for all UPS, FEDEX, or any other air freight carrier shipments. Please state if you wish to use a specific carrier when ordering or ETS will select the most efficient house carrier. Title for goods passes to the buyer at F.O.B. point. All goods are shipped at the buyer´s risk and all claims must be made with the freight carrier, normally within 14 days of receipt of merchandise. We do not ensure on–time delivery or safe carriage of goods. Recourse rests exclusively with the transportation company. No adjustments will be given for any delayed or damaged shipments or for any other reason beyond ETS control. No C.O.D., Parcel Post, or Priority Mail shipments.
Orders requiring inside or residential delivery must be specifically noted on the order. Deliveries beyond the customer´s dock may be subject to an additional charge and will only be done at the customer´s risk. If an inside delivery is requested at the time of delivery, please be advised you may receive a subsequent invoice for this service in addition to your original invoice.
We are pleased to offer two state of the art production facilities and F.O.B. shipping points for most ETS Express, LLC orders; Oxnard, California and Concord, North Carolina. Whenever possible, orders will be produced, shipped, and freight billed from the respective F.O.B. point closest to the final shipping destination. ETS Express, LLC reserves the right to determine the production F.O.B. point for orders and is not able to split production between facilities based on multiple ship to destinations.
Net 30 on approved credit. Interest charges will be assessed on all past due balances. For your convenience, we accept Visa, Mastercard and American Express. If payment by credit card: due to the custom-made nature of our products, we may charge your credit card for the order (in whole or in part) before production and shipping of your order.
ETS warrants its products for satisfactory workmanship and material with the exceptions described in "Nature of Ceramics & Glass" section above. Defective merchandise will be replaced, but OUR LIABILITY IS LIMITED TO THE INVOICE COST OF THE ITEM. NO OTHER WARRANTIES ARE PROVIDED.